HEX USB CAN VAG-COM For 704.1

HEX USB CAN VAG-COM For 704.1

Product Name:   HEX USB CAN VAG-COM For 704.1
Part No.:               YH025
Net Weight:          0.15KG

12 pcs in stock

Workable Models:
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- Audi
- Skoda
- Seat
 
Reference Data:
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only.
6. Supported also ISO9141 protocol
7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.

Diagnostics Type including:
All Golf-5 platform cars (A5 platform) including:
- 2003+ VW Touran (1T chassis) 
- 2004+ VW Golf (1K chassis) 
- 2004+ VW Caddy (2K chassis) 
- 2004+ Audi A3 (8P chassis) 
- 2004+ Seat Altea (5P chassis) 
- 2004+ Skoda Octavia (1Z chassis) 
- 2005+ Seat Toledo (5P chassis) 
- 2005+ Golf Plus (5M chassis) 
- 2005+ Seat Leon (1P chassis) 
- 2005.5+ Jetta (1K chassis) 
- 2006+ Eos (1F chassis) 
- 2003+ Audi A8 and A8L (D3 platform, 4E chassis) 
- 2005+ Audi A6 (C6 platform, 4F chassis) 
- 2005+ Audi A4 ("B7" platform) (some control modules) 
- 2005.5+ VW Passat (B6 Platform, 3C chassis)

Read & erase error code, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)