 |
|
Automotive Sensor Simulator & Tester |
|
|
Automotive Sensor Simulator & Tester
|
| Product Name: |
Automotive Sensor Simulator & Tester |
| Part No.: |
YH076 |
| Net Weight: |
3.5KG |
|
Function:
| Measure the signals of automotive sensors |
| |
· |
The most complete hand held diagnostic tester for sensors,wiring,connectors |
| and on-board computers |
| DC voltage,lambda,frequency and pulse signals can be measured |
| · |
Digital display shows actual output of signals |
| · |
Measures any voltage AC or DC,resistance or frequency output |
| Allows Simulation of most Sensor and computer managemeng omponents |
| |
· |
Simulating temperature sensors,throttle potentiometers,switches,air |
| |
|
flow meters and lembda/oxygen srnsors |
| |
· |
Features AC voltage output to simulate vehicle speed sensors(vss), |
| |
|
CAM,CRANK,and ignition reluctors |
| |
· |
Simulates actual working condition of any sensor without having to remove it |
| |
|
from the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc |
| Cheeks basic ECU operation |
| |
· |
Controlling the signals being produced allows you to check ECU response and |
| |
|
operation.This prevents mis-diagnosis where the fault may lie in the ECU itself |
| |
|
or in the wiring between the component and the ECU.Works independently or with |
| |
|
any scan tool ever made |
| Can be used on any domestic or import vehicle |
| Eliminates unnecessary replacement of non-defective sensors |
Can drive computer into"open or closed loop."
Specifications:
| Simulate Signal |
Range |
Function |
| DC Voltage |
0-1V |
Simulating lambda/oxygen sensors |
| 0-5V |
Simulating DC signal of sensors |
| 0-12V |
| Resistance |
0-5K |
Simulating temperature or resistance sensors |
| 0-200K |
| Frequency SignalV/Duty/Hz |
0-5v 10-90% 10-4KHz |
Simulating frequency signal sensors |
| 0-12V 10-90% 10-4KHz |
| |
| Test Function |
Range |
Basic Accuracy |
| DC Voltage |
400mV,4v ,40v,400v,1000v |
±(0.5%+3d) |
| AC Voltage |
400mV,4v ,40v,400v,750v |
±(0.8%+3d) |
| DC Current |
40mA,400mA,10A |
±(1.2%+3d) |
| AC Current |
40mA,400mA,10A |
±(1.5%+3d) |
| Resistance(Ω) |
400,4K,40K,400K,4M,40M |
±(1.0%+3d) |
| Capacitance |
40nF,400nF,4μF,40μF,100μF |
±(5.0%+3d) |
| Frequency |
10Hz-10MHz |
±(0.5%+3d) |
| Duty cycle |
0.1%-99.9% |
±(2.0%+3d) |
| Diode test and Audible Continuity test |
|
Test current:1±0.6mA |
| |
>60Ω Buzzer sounds | | | | |
